Home / Resin systems / ResinBound overlay
ResinBound overlay systems
Stone and clear resin laid over your existing surface — smooth, seamless, and no loose gravel to sweep back off the lawn.
Laid depth
Per sq ft, resin from
Typical driveway
Vehicles back on
What it is
Resin bound is a mix of washed, graded stone and a clear two-part resin, blended on site and troweled out while it is still workable. Every piece of stone is coated and locked to the ones around it, so the finished surface is solid underfoot with no loose material.
Because it is laid as an overlay, we can usually go straight over sound concrete or asphalt. That keeps the cost and the disruption down compared with digging out and starting again.
It is laid between 15 mm and 20 mm deep depending on what uses it. Walkways and patios sit at the lower end. Driveways carrying cars, SUVs and light trucks go deeper.
Depth and price
The material is the same. What changes is how deep it goes, and that is what moves the rate per square foot.
15 mm — walkways, patios, pool surrounds
Foot traffic only. Crushed glass and sand in the blend keep it secure underfoot when wet.
per sq ft, resin only
18–20 mm — driveways
Cars, SUVs and light trucks. The extra depth carries the load where vehicles turn and brake.
per sq ft, resin only
Where it works
Over sound concrete or asphalt at 18–20 mm, with no loose stone to track into the garage.
15 mm over an existing slab, laid up to edges and around planting without cuts.
Slip resistant when wet, and it drains rather than holding puddles at the edge.
Finished work
ResinBound overlay laid by our crews across southern Ontario.
Laying it yourself?
We sell the same resin and stone we install, in units sized for real jobs. Work out what you need with the coverage calculator, or call and we will work it out with you.
Get a price for your driveway
Send us the size and a photo of what is there now. We will come back with a figure and a date.